Activities and Events

Upcoming Events

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

Previous Activities and Events

Recent Member Publications

Update 13-03-2018

2018-IWS/IUL
New possibilities for process control and higher efficiency at magnetic pulse welding

Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya, A. E., Dittrich, S.
At: International Symposium ‘Tailored Joining’, 27.-28.2.2018, Dresden

2017-IWU
Numerische und experimentelle Untersuchung von inkrementellen, elektromagnetischen Umformvorgängen

Linnemann M., Scheffler C., Kurka P., Psyk V., Landgrebe D.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb – ZWF, 112. Jahrgang, 7-8/2017, S. 454-458.

2017-IWS/IUL
Targeted Weld Seam Formation and Energy Reduction at Magnetic Pulse Welding (MPW)

Bellmann J., Lueg-Althoff J., Schettler S., Schulze S., Gies S., Beyer E., Tekkaya, A. E.
In: eBIS 2017 (5), pp. 91–102. DOI: 10.17729/ebis.2017.5/10, 2017

2017-IWU
Multi-physics modeling of composite materials for magnetic pulse welding tools

Vasiukova D., Cheng P., Scheffler C., Psyk V.
At: 3rd International Conference on Mechanics of Composites, MECHCOMP3, 4-7 July, 2017, Bologna.

2017-IWS/IUL
Neue Möglichkeiten zur Prozessüberwachung und Effizienzsteigerung beim Magnetpulsschweißen

Bellmann J., Lueg-Althoff J., Schulze S., Gies S., Beyer E., Tekkaya, A. E.
At: Werkstoffwoche2017. DGM. Dresden, 28.09.2017.

2017-IWU
Process analysis for magnetic pulse welding of similar and dissimilar material sheet metal joints

Psyk V., Scheffler C., Linnemann M., Landgrebe D.
At: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge

2017-IWS/IUL
Measurement of Collision Conditions in Magnetic Pulse Welding Processes

Bellmann, J.; Lueg-Althoff, J.; Schulze, S.; Gies, S.; Beyer, E.; Tekkaya, A. E.
In: Journal of Physical Science and Application 7 (4), pp. 1–10. DOI: 10.17265/2159-5348/2017.04.001, 2017

2017-IWU/IFT
Principle and setup for characterization of material parameters for high speed forming and cutting

Tulke, M.; Scheffler, C.; Psyk, V.; Landgrebe, D.; Brosius, A.
At: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge.

2017-IWU
Manufacturing of hybrid aluminum copper joints by electromagnetic pulse welding– an analysis of important process parameters

V. Psyk, C. Scheffler, M. Linnemann, D. Landgrebe
At: 20th International ESAFORM Conference on Material Forming – ESAFORM 2017, 26th – 28th April 2017, Dublin

2016-IWS/IUL
Influence of selected coatings on the welding result during magnetic pulse welding

Bellmann, J.; Lueg-Althoff, J.; Beyer, E.; Tekkaya, A. E.
At: International Symposium ‘Tailored Joining’, 23.-24.2.2016, Dresden

2016-IUL
Analytical prediction of Joule heat losses in electromagnetic forming coils

S. Gies, A. E. Tekkaya
In: Journal of Materials Processing Technology Link

2016-IWS/IUL
Measurement and analysis technologies for magnetic pulse welding: established methods and new strategies

J. Bellmann, J. Lueg-Althoff, S. Schulze,S. Gies, E. Beyer, A. E. Tekkaya
In: Advances in Manufacturing December 2016, Volume 4, Issue 4, pp 322–339 Link

2016-IWU
Process analysis for magnetic pulse welding of aluminium-copper joints

Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
At: I2FG workshop on impulse metalworking 2016, 01.-02.12.2016, Nantes

2016-IWU
Magnetimpulsschweißen von Mischverbindungen

Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
In: Maschinenmarkt 39/2016, S. 62-65 Link

2016-IWU
Prozessanalyse für das Magnetimpulsschweißen von Aluminium-Kupfer-Mischverbindungen

Psyk, V.; Linnemann, M.; Sheffler, C.; Landgrebe, D.
In: Sächsische Fachtagung Umformtechnik, 07.-08.12.16, Dresden, S. 174-183

2016-IWU/BWI
Effect of the welding parameters on the structural and mechanical properties of aluminium and copper sheet joints by electromagnetic pulse welding

Kwee,I.; Psyk, V.; Faes, K.
In: World Journal of Engineering and Technology, 4, 538-561 Link

2016-IUL/IWS
Effects of Surface Coatings on the Joint Formation During Magnetic Pulse Welding in Tube-to-Cylinder Configuration

Bellmann, J., Lueg-Althoff, J., Goebel, G., Gies, S., Beyer, E., Tekkaya, A.E.
In: Tekkaya, A.E., Kleiner, M. (Eds.), High Speed Forming 2016, Proceedings of the 7th International Conference, Dortmund, Germany, pp. 279–288.

2016-IWU
Influence of Different Strain Rates on the Flow Curve and the Formability of Thin Aluminium and Tinplate Sheets

Linnemann, M.; Lieber, T.; Scheffler, C.; Psyk, V.; Müller, R.; Landgrebe, D.
In: In: 7th International Conference on High Speed Forming – ICHSF 2016, Dortmund, 2016, pp. 245-255.
www.researchgate.net/publication/302496266

2016-IUL
Analytical approach for magnetic pulse welding of sheet connections.

M. Hahn, C. Weddeling, J. Lueg-Althoff, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013615302077

2016-IUL/OSU
Vaporizing foil actuator welding as a competing technology to magnetic pulse welding.

M. Hahn, C. Weddeling, G. Taber, A. Vivek, G.S. Daehn, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013615301977

2016-IUL/IWS
Workpiece positioning during magnetic pulse welding of aluminum steel joints.

A. Lorenz, J. Lueg-Althoff, J. Bellmann, G. Göbel, S. Gies, C. Weddeling, E. Beyer, E. Tekkaya. In: Welding Journal
s3.amazonaws.com/WJ-www.aws.org/supplement/WJ_2016_03_s101.pdf

2015-OSU
Impact Welding of Aluminum Alloys 6061 and 5052 by Vaporizing Foil Actuators: Heat-Affected Zone Size and Peel Strength.

S. R. Hansen, A. Vivek, and G. S. Daehn
In: Journal of Manufacturing Science and Engineering 137, no. 5 (2015)

2015-OSU
Solid state impact welding of BMG and copper by vaporizing foil actuator welding

A. Vivek, M. Presley, K. M. Flores, N. H. Hutchinson & G. S. Daehn
In: Materials Science and Engineering: A, 634, 14-19. (2015)

2015-OSU
Impact Welding of Aluminum Alloy 6061 to Dual Phase 780 Steel Using Vaporizing Foil Actuator

A. Vivek, B. Liu, D. Sakkinen, M. Harris & G. Daehn
In: SAE Technical Paper (No. 2015-01-0701) (2015)

2015-OSU
Use of Vaporizing Foil Actuator for Impact Welding of Aluminum Alloy Sheets with Steel and Magnesium Alloys

B. Liu, A. Vivek, & G. S. Daehn
In: TMS Light Metals Division, 463-468. (2015)

2015-OSU
Vaporizing Foil Actuator: a Tool for Creating High‐Pressure Impulses for Metalworking

A., Vivek, G. A., Taber, J. R. Johnson, & G. S. Daehn
In: 60 Excellent Inventions in Metal Forming (pp. 77-82). Springer Berlin Heidelberg. (2015)

2015-IWU
Optimisation of component performance via structuring.

V. Psyk, P. Kurka, S. Kimme, M. Werner, D. Landgrebe, A. Ebert, M. Schwarzendahl.
In: Proceedings of the 4th International Conference on New Forming Technology – ICNFT2015
www.researchgate.net/publication/281478660_Optimisation_of_component_performance_via_structuring

2015-IUL
Measurement of working coil temperature in electromagnetic forming processes by means of optical frequency domain reflectometry.

S. Gies, A. Langolf, C. Weddeling, A.E.Tekkaya. In: Case Studies in Nondestructive Testing and Evaluation
www.sciencedirect.com/science/article/pii/S2214657115000039

2014-IUL
Thermal loads of working coils in electromagnetic sheet metal forming.

S. Gies, C. Löbbe, C. Weddeling, A.E. Tekkaya. In: Journal of Materials Processing Technology
www.sciencedirect.com/science/article/pii/S0924013614001721

2014-IWU
Electromagnetic joining of hybrid tubes for hydroforming.

V. Psyk, T. Lieber, P. Kurka, W.-G. Drossel. In: Procedia CIRP
www.researchgate.net/publication/275541818_Electromagnetic_Joining_of_Hybrid_Tubes_for_Hydroforming

2014-IWU
A novel tool design strategy for electromagnetic forming.

R. Neugebauer, V. Psyk, C. Scheffler. In: Advanced Materials Research
www.researchgate.net/publication/271975450_A_Novel_Tool_Design_Strategy_for_Electromagnetic_Forming